BOAO Product Catalogue
Five-Level Above-Ground Lift-and-Slide Parking System
Multi-level Puzzle Parking System
Five-Level Above-Ground Lift-and-Slide Parking System
5-level lift-and-slide storage uses vacant positions to move platforms to the access level.
- 5 above-ground levels
- Lateral positioning and vertical storage
- Button operation, optional IC card
- Site, vehicle and fire-protection requirements checked
System Overview
Working Principle
Platforms on the ground and intermediate levels move sideways to create a vacant position for the target platform. This 5-level above-ground configuration uses wire-rope lifting. Capacity, vehicle limits and installation height depend on the model and site.
Product Advantages
Key Characteristics
Lateral positioning and vertical storage
Button operation, optional IC card
Site, vehicle and fire-protection requirements checked
Configuration Reference
Technical Specifications
- Model series
- PSH5
- Capacity for N columns
- 5N−4 (N = columns)
- Lift motor
- 2.2 kW
- Lift speed
- 4–6 m/min
- Power
- Three-phase 380 V 50 Hz
- Levels
- 5 above ground
- Lifting method
- Motor-driven wire rope
- Traverse motor
- 0.2 kW
- Traverse speed
- 8–10 m/min
- Operation
- Buttons / optional IC card
Final product parameters and configuration must be confirmed for the specific project.
Selection Guidance
Five-level storage
The PSH5 arrangement uses five above-ground levels. Motor-driven wire rope lifts the platforms, while lateral movement creates the vacant position needed for access. It offers a level-count option between the four- and six-level models when comparing available height and the desired number of spaces.
Work out an initial count
The reference capacity is 5N-4 for N columns. This formula describes the listed arrangement and is useful for an initial comparison; the project layout determines the final count. Check column spacing, the access approach and the height required for the intended vehicles.
What to include in an enquiry
Provide dimensioned plans and sections, clear height, obstructions, target spaces, vehicle sizes and weights, and the location from which drivers will enter. State expected use, available power and local fire-protection requirements to support a coordinated equipment and building review. Identify beams, ducts and other fixed obstructions.